BACKFlat Steel Bars
AISI 1045 / SAE 1045 Steel Square Bar / En8 C45 S45c Hot Rolled Solid Square Flat Rectangle Special Steel Bar
Description:
|
Type:
|
Square Steel
|
|
Standard:
|
GB, ASTM, DIN, JIS, AISI, BS
|
|
Trademark:
|
Carbon Structural Steel
|
|
Forming:
|
Hot-Rolled Steel
|
|
Connection Form:
|
Welded Connection
|
|
Products:
|
Hot Rolled Steel Square Bar
|
parameters
SAE 1045 Steel Square Bar / C45 S45c Hot Rolled Solid Square Steel Bar
Hot rolled square bars are produced by hot rolling continuous casting billets. Usually, they have a square cross- section with sharp and round edges and are intended either to be further machined or cold drawn and so on.
1.Hot rolled steel square bar Sizes we can offer: 1)Side sizes:10X10 to 150X150 MM 2)Length:1-8Metal or as required 3)R corner: Sharo or round corner as per requirements 4)Straightness: max 3mm/m
2.Application of the hot rolled steel square bar 1): Can be used in many fields such as building, automobile, shipbuilding, petrochemical, machinery, medicine, food, electric power, energy, space, building and decoration, etc. 2): Can be made into mould template, mortise pin, column 3): This kind of steel have good mechanical property, is widely used in structural parts which may support stress alternation, especially made into some connecting rods, bolts, wheel gear...
4): This kind of steel is the most common blanks and materials of shaft parts.
introduction
3.Packing : 1): Paint oil on the surface to protect steel bars from rusting. 2): Bundle packing by Iron Strips. 3): Bundle weight is from 2mt to 3 mt. 4): Two or three tags will be attached on each bundle.
4.Equivalent grade and chemical composition to SAE 1045,S45C
|
Standard
|
Grade
|
C
|
Si
|
Mn
|
P
|
S
|
|
GB/T699
|
45
|
0.42-0.5
|
0.17-0.37
|
0.5-0.8
|
0.035
|
0.035
|
|
JIS G4051
|
S45C
|
0.42-0.48
|
0.15-0.35
|
0.6-0.9
|
0.03
|
0.035
|
|
ASTM A29/A29M
|
1045
|
0.43-0.5
|
0.15-0.35
|
0.6-0.9
|
0.04
|
0.05
|
|
EN 10083-2
|
C45E/1.1191
|
0.43-0.5
|
0.4
|
0.5-0.8
|
0.03
|
0.035
|
5.Mechanical property of SAE 1045,S45C steel square bar
|
Tensile Strength(Mpa)
|
600 (min)
|
|
Yield Strength(Mpa)
|
355 (min)
|
|
Elongation
|
16 (min)
|
|
Shrinkage
|
40 (min)
|
|
Akv(J)
|
39 (min)
|
6.Payment terms: T/T or L/ C
(1)30% paid by T/T and rest 70% by T/T upon the copy of B/B. (2)100% irrevocable L/C at sight
7.MOQ:3tons
8.Delivery time:7-30 days upon to the order details
9.Trade term: FOB CFR CIF EXW and so on
10.. Mark: including steel material, heat No., pieces, weight, date and so on.
