JIANGSU IRUNT STEEL GROUP CO., LTD.
Products
BACK

Aluminum Alloy Pipe

  • Needle Size 8*0.7mm 8*1mm 9*1 Pancake 1060 3003 1050 Aluminum Coil Pipe
  • Needle Size 8*0.7mm 8*1mm 9*1 Pancake 1060 3003 1050 Aluminum Coil Pipe
  • Needle Size 8*0.7mm 8*1mm 9*1 Pancake 1060 3003 1050 Aluminum Coil Pipe

    Needle Size 8*0.7mm 8*1mm 9*1 Pancake 1060 3003 1050 Aluminum Coil Pipe

    Description:
    Application: Refrigerator, Air Condition, Automobile, Water Heater
    Shape: Round
    Surface Treatment: Anodized, Mill Finished, Polished, Sand Blasted, Brush
    Grade: 1000 Series
    Alloy: Non-alloy
    Temper: T3 - T8

    parameters

    1: Brief Introduction Of 1060 Aluminium/Aluminum 

    1060 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series). It
    is fundamentally very similar to 1050 aluminium alloy,with the difference coming down to 0.1% aluminium by weight.
    However, while both 1050 and 1060 are covered by the same ISO standard, they are covered by different ASTM standards.
    As a wrought alloy, it is typically formed by extrusion or rolling. It is commonly used in the electrical and chemical
    industries, on account of having high electrical conductivity, corrosion resistance, and workability. It has low mechanical
    strength compared to more significantly alloyed metals. It can be strengthened by cold working, but not by heat
    treatment.Alternate designations include Al99.6 and A91060.
    Hardening:
    Aluminium/Aluminum 1060 alloy can be hardened only from cold working.Tempers H18, H16, H14 and H12 are determined
    based on the amount of cold working imparted to this alloy.
    Annealing:
    Aluminium/Aluminum 1060 alloy can be annealed at 343°C (650°F) and then cooled in air.
    Cold Working:
    Aluminium/Aluminum 1060 has excellent cold working characteristics and conventional methods are used to readily cold
    work this alloy.
    Welding:
    Standard commercial methods can be used for Aluminium / Aluminum 1060 alloy. The filter rod used in this welding
    process whenever needed should be of AL 1060. Good results can be obtained from the resistance welding
    process performed on this alloy through trial and error experimentation.
    Forging:
    Aluminium/Aluminum 1060 alloy can be forged between 510 to 371°C (950 to 700°F).
    Forming:
    Aluminium/Aluminum 1060 alloy can be formed in an excellent manner by hot or cold working with commercial techniques.
    Machinability:
    Aluminium/Aluminum 1060 alloy is rated with fair to poor machinability, especially in the soft temper conditions.
    The machinability is much improved in the harder (cold worked) tempers. Usage of lubricants and either high-speed
    steel tooling or carbide are recommended for this alloy. Some of the cutting for this alloy can also be done dry.
    Heat Treatment:
    Aluminium/Aluminum 1060 alloy does not harden by heat treatment and it can be annealed after the cold working process.
    Hot Working:
    Aluminium/Aluminum 1060 alloy can be hot worked between 482 and 260°C (900 and 500°F).
    Applications:
    Aluminium/Aluminum 1060 alloy is widely used in the manufacture of railroad tank cars and chemical equipment.

    introduction

    2: Chemical Composition  

    Needle Size 8*0.7mm 8*1mm 9*1 Pancake 1060 3003 1050 Aluminum Coil Pipe