JIANGSU IRUNT STEEL GROUP CO., LTD.
+86-18678940282　 shawna@iruntsteel.com　
Products

categories

Related Products

    Sales hotline+86-18678940282
    BACK
    categories

    Flat Steel Bars

    • C45 S45c Hot Rolled Solid Flat Rectangle Special Steel Bar
    • C45 S45c Hot Rolled Solid Flat Rectangle Special Steel Bar

    C45 S45c Hot Rolled Solid Flat Rectangle Special Steel Bar

    Description:
    Length
    2-6m or as Required
    Main Grade
    Ss400 A36 1020 1045 4140 40cr
    Specification
    5*5mm-150*150mm

    EmailMake an inquiry
    parametersintroduction

    parameters

    Equivalent grade and chemical composition to SAE 1045,S45C
    Standard Grade C Si Mn P S
    GB/T699 45 0.42-0.5 0.17-0.37 0.5-0.8 0.035 0.035
    JIS G4051 S45C 0.42-0.48 0.15-0.35 0.6-0.9 0.03 0.035
    ASTM A29/A29M 1045 0.43-0.5 0.15-0.35 0.6-0.9 0.04 0.05
    EN 10083-2 C45E/1.1191 0.43-0.5 0.4 0.5-0.8 0.03 0.035

    Mechanical property of SAE 1045,S45C steel square bar
    Tensile Strength(Mpa) 600 (min)
    Yield Strength(Mpa) 355 (min)
    Elongation 16 (min)
    Shrinkage 40 (min)
    Akv(J) 39 (min)

    introduction

    SAE 1045 Steel Square Bar / C45 S45c Hot Rolled Solid Square Steel Bar

    Hot rolled square bars are produced by hot rolling continuous casting billets. 
    Usually, they have a square cross- section with sharp and round edges and are intended either to be further machined or cold drawn and so on.

    1.Hot rolled steel square bar Sizes we can offer:
    1)Side sizes:10X10 to 150X150 MM
    2)Length:1-8Metal or as required
    3)R corner: Sharo or round corner as per requirements 
    4)Straightness: max 3mm/m

    2.Application of the hot rolled steel square bar
    1): Can be used in many fields such as building, automobile, shipbuilding, petrochemical, machinery, medicine, food, electric power, energy, space, building and decoration, etc.
    2): Can be made into mould template, mortise pin, column
    3): This kind of steel have good mechanical property, is widely used in structural parts which may support stress alternation, especially made into some connecting rods, bolts, wheel gear...
    4): This kind of steel is the most common blanks and materials of shaft parts.
    Keywords:C45 S45c Hot Rolled Solid Flat Rectangle Special Steel Bar,

    CONTACT US

    JIANGSU IRUNT STEEL GROUP CO., LTD.

    Tel: +86-18678940282

    Whatsapp/Wechat: +86 13561246735

    Email: shawna@iruntsteel.com　

    Address: Room1001 of Dadong steel pipes market east A1 building ,Wuyishan Road, Economy and Technology development zone ,Liaocheng City ,Shandong Province, P.R.China

    © 2021 JIANGSU IRUNT STEEL GROUP CO., LTD.TagsSitemap.xml